Graphite
Stacked graphene layers, crystalline.
0.335 nm spacing betwwen planes.
About 10% volume expansion upon
Li intercalaion
Theoretical maximum capacity is
372mAl/g(LiC6)
Coating by Conductive Materials
The major effects and advantages
No classical binder is required to prepare mechanically and electrochemically stable anodes.
Irreversible capacity in the first cycle
3-1-2. Anode making (tape casting method)
전지 재료를 전극으로 성형하기 위해 가장 널리 쓰이는 방법으로 tape casting method를 들 수 있다. 이 방법은 세라믹 재료인 active material을 집전체 위에 도포하여 전극으로 만드는 것으로 상온 공정이 가능하며 비교적 간단하여 공정이 단순하다는 것을 장점으로 꼽을 수 있
anode in a model glucose/O2 biofuel cell
CNT-supported glucose oxidase (CNT–GOx) was examined in the presence of 1,4-benzoquinone (BQ)
To avoid the application of additional redox mediators, enzymes, which exibit redox properities and are able to directly exchange electrons with conducting materials, are applied.
Hemoproteins usually are able to exchange electrons
♯형광체(phosphor)
(1)형광체의 정의
전자 빔의 충격에 의해 발광하는 아주 작은 결정 입자의 집합체. 텔레비전 수상관에는 일반적으로 황화물(黃化物) 형광체(ZS 또는 ZS와 CdS의 혼합 결정에 소량의 Ag를 첨가한 것)가 많이 사용되고 컬러 수상관의 적색 발광용으로는 희토류(稀土類) 형광체(Y2O2 또는 Y2
▪ Ion
기존의 액체 전해질을 사용하는 리튬 이온 전지
액체 전해질을 사용하기 때문에 안전성 결여
▪ Polymer
액체 전해질을 사용하던 전지의 단점인 누액 가능성과 폭발 위험성을 개선
이온전도도가 상대적으로 낮음
▪ Li/S
고체전해질을 사용하여 안정성을 높임
액체전해질 정도의 이온
First, Substrate is consists of a plastic or glass, a portion of the OLED is supportive.Anode is a role that make electron holes when current flows by removing electron. And the upper Conducting Layer is the place that Electron Holes is being created.Emissive Layer is the place accepting an electron from Cathode and produce light.
Emissive layer and conducting layer are called organic layer beca
리튬이온전지는 음극재, 양극재, 분리막, 전해액 등 4개의 핵심소재로 구성되어 있고, 이 핵심소재들이 반응하여 에너지를 저장하고 방출합니다.
양극재는 전기가 들어오면 리튬이온을 통해 전하를 실어 나르는 역할을 하고, 음극재는 이동해 온 리튬이온과 전하를 저장하였다가 방출하는 역할을 담당
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N
1.Current Status-1
Which material is used
PVC (polyvinyl chloride)
: 염화 비닐을 주성분으로 하는 열가소성 플라스틱
Advantages of PVC
대량생산 가능, 저렴한 가격
가벼움, 휴대성
Disadvantages of PVC
코팅이 벗겨짐, 파손 (내구성이 떨어짐)
열에 약함
폐기 처분 시 다이옥신 배출(환경오염)
단순 결제수